Condition Select

Show detailed area configuration

Identification

Vendor-ID: 338 Device-ID: 4129 Vendor: Leuze electronic GmbH + Co. KG Leuze_electronic-logo.png
Leuze_electronic-logo.png
IODD Version: V1.2 File Creation Date: 2016-01-22 Copyright: Leuze electronic GmbH + Co. KG
IO-Link Revision: V1.1 Minimal Cycle Time: 0µs SIO not supported

Device Variants

Leuze_electronic-CML700-pic.png
Leuze_electronic-CML700-pic.png
Leuze_electronic-CML700-icon.png
Leuze_electronic-CML700-icon.png
CSL710 CSL710 [2 Bytes and COM2] Switching light curtain CSL710

Process Data

Input Image
Label: CSL Process data
Data Format: record 16 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 15
Label: Measurement data valid
Value: false Invalid
Value: true Valid
Data Format: boolean
Subindex: 2 Bit-Offset = 8
Label: Number of cycles
Data Format: unsigned integer 7 bit
Subindex: 3 Bit-Offset = 0
Label: Status of areas 8 .. 1
Data Format: unsigned integer 8 bit

Variables

Index: 0
Label: Direct Parameters 1
Description:
Data Format: record 128 bit, Access via Subindex Access via Subindex
Subindex: 1 Bit-Offset = 120
Label: Reserved
Data Format: unsigned integer 8 bit
Subindex: 2 Bit-Offset = 112
Label: Master Cycle Time
Data Format: unsigned integer 8 bit
Subindex: 3 Bit-Offset = 104
Label: Min Cycle Time
Data Format: unsigned integer 8 bit
Subindex: 4 Bit-Offset = 96
Label: M-Sequence Capability
Data Format: unsigned integer 8 bit
Subindex: 5 Bit-Offset = 88
Label: IO-Link Version ID
Data Format: unsigned integer 8 bit
Default Value: 17
Subindex: 6 Bit-Offset = 80
Label: Process Data Input Length
Data Format: unsigned integer 8 bit
Subindex: 7 Bit-Offset = 72
Label: Process Data Output Length
Data Format: unsigned integer 8 bit
Subindex: 8 Bit-Offset = 64
Label: Vendor ID 1
Data Format: unsigned integer 8 bit
Subindex: 9 Bit-Offset = 56
Label: Vendor ID 2
Data Format: unsigned integer 8 bit
Subindex: 10 Bit-Offset = 48
Label: Device ID 1
Data Format: unsigned integer 8 bit
Subindex: 11 Bit-Offset = 40
Label: Device ID 2
Data Format: unsigned integer 8 bit
Subindex: 12 Bit-Offset = 32
Label: Device ID 3
Data Format: unsigned integer 8 bit
Subindex: 13 Bit-Offset = 24
Label: Reserved
Data Format: unsigned integer 8 bit
Subindex: 14 Bit-Offset = 16
Label: Reserved
Data Format: unsigned integer 8 bit
Subindex: 15 Bit-Offset = 8
Label: Reserved
Data Format: unsigned integer 8 bit
Subindex: 16 Bit-Offset = 0
Label: Standard Command
Access Rights: read and write
Index: 2
Label: Standard Command
Description:
Value:
Value:
Value: 162 Teach
Value: 163 Save all settings
Value: 200 Start DataStorage
Value: 201 Stop DataStorage
Data Format:
Default Value: 128
Access Rights: write only
Index: 12
Label: Device Access Locks
Description:
Data Format: record 16 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 0
Label: Parameter (write) Access Lock
Data Format: boolean
Subindex: 2 Bit-Offset = 1
Label: Data Storage Lock
Data Format: boolean
Subindex: 3 Bit-Offset = 2
Label: Local Parameterization Lock
Data Format: boolean
Subindex: 4 Bit-Offset = 3
Label: Local User Interface Lock
Data Format: boolean
Access Rights: read and write
Index: 16
Label: Vendor Name
Description:
Data Format: string 32 Byte
Access Rights: read only
Index: 17
Label: Vendor Text
Description:
Data Format: string 64 Byte
Access Rights: read only
Index: 18
Label: Product Name
Description:
Data Format: string 64 Byte
Access Rights: read only
Index: 19
Label: Product ID
Description:
Data Format: string 64 Byte
Access Rights: read only
Index: 20
Label: Product Text
Description:
Data Format: string 64 Byte
Access Rights: read only
Index: 21
Label: Serial Number
Description:
Data Format: string 16 Byte
Access Rights: read only
Index: 22
Label: Hardware Version
Description:
Data Format: string 64 Byte
Access Rights: read only
Index: 23
Label: Firmware Version
Description:
Data Format: string 64 Byte
Access Rights: read only
Index: 24
Label: Application Specific Tag
Description:
Data Format: string 32 Byte
Access Rights: read and write
Index: 32
Label: Error Count
Description:
Data Format: unsigned integer 16 bit
Access Rights: read only
Index: 36
Label: Device Status
Description:
Value Range: 5 ... 255
Value: 0 Device is OK
Value: 1 Maintenance required
Value: 2 Out of specification
Value: 3 Functional check
Value: 4 Failure
Data Format: unsigned integer 8 bit
Access Rights: read only
Index: 37
Label: Detailed Device Status
Description:
Data Format: array
Access Rights: read only
Index: 40
Label: Process Data Input
Description:
Data Format: processDataIn Byte
Access Rights: read only
Index: 64
Label: Receiver part no.
Description: Receiver order number
Data Format: string 20 Byte
Access Rights: read only
Index: 65
Label: Transmitter product designation
Description: Transmitter type designation
Data Format: string 64 Byte
Access Rights: read only
Index: 66
Label: Transmitter part no.
Description: Transmitter order number
Data Format: string 20 Byte
Access Rights: read only
Index: 67
Label: Transmitter serial number
Description: 9-digit number for explicit product identification
Data Format: string 16 Byte
Access Rights: read only
Index: 68
Label: Device characteristics
Description: Device characteristics specify the beam spacing, the number of physical / logical beams and the cycle time of the device.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 64
Label: Beam spacing
Value Range: 1 ... 400
Data Format: unsigned integer 16 bit
Default Value: 5
Subindex: 2 Bit-Offset = 48
Label: Number of physical individual beams
Data Format: unsigned integer 16 bit
Default Value: 16
Subindex: 3 Bit-Offset = 32
Label: Number of configured logical beams
Data Format: unsigned integer 16 bit
Default Value: 16
Subindex: 4 Bit-Offset = 16
Label: Number of optical cascades
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 5 Bit-Offset = 0
Label: Device cycle time
Data Format: unsigned integer 16 bit
Default Value: 1000
Access Rights: read only
Index: 69
Label: Teach status
Description: Status information about teach operation
Value Range: 129 ... 255
Value: 0 Teach ok
Value: 1 Teach busy
Value: 128 Teach error
Data Format: unsigned integer 8 bit
Default Value: 0 Teach ok
Access Rights: read only
Index: 70
Label: Alignment
Description: Alignment level of first and last beams. Values are different if function reserve changes.
Data Format: record 32 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 16
Label: Last beam intensity
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 2 Bit-Offset = 0
Label: First beam intensity
Data Format: unsigned integer 16 bit
Default Value: 0
Access Rights: read only
Index: 71
Label: Global settings
Description: Global settings allow setting of beam operation mode (parallel-/diagonal-/cross-beam), min. object size for evaluation (smoothing), etc.
Data Format: record 40 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 32
Label: Beam mode
Value: 0 Parallel-beam scanning
Value: 1 Diagonal-beam scanning
Value: 2 Crossed-beam scanning
Data Format: unsigned integer 8 bit
Default Value: 0 Parallel-beam scanning
Subindex: 2 Bit-Offset = 24
Label: Smoothing - less than N interrupted beams will be ignored
Value Range: 1 ... 255
Data Format: unsigned integer 8 bit
Default Value: 1
Subindex: 3 Bit-Offset = 16
Label: Filter depth
Value Range: 1 ... 255
Data Format: unsigned integer 8 bit
Default Value: 2
Subindex: 4 Bit-Offset = 8
Label: Digital IO switching level
Value: 0 Transistor, NPN
Value: 1 Transistor, PNP
Data Format: unsigned integer 8 bit
Default Value: 1 Transistor, PNP
Subindex: 5 Bit-Offset = 0
Label: Key Lock
Value: 0 Unlocked
Value: 1 Locked
Value: 2 Volatile
Data Format: unsigned integer 8 bit
Default Value: 0 Unlocked
Access Rights: read and write
Index: 72
Label: CSL status information
Description: Detailed device status code
Data Format: unsigned integer 16 bit
Access Rights: read only
Index: 73
Label: Blanking settings
Description: Up to 4 blanking areas can be configured. Deactivated beams can be setted to 0, 1 or the logical value of the neighbor beam. If autoblanking is activated, the number of chosen blanking areas will be configured with teach command.
Data Format: record 208 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 200
Label: Number of autoblanking areas
Value Range: 0 ... 4
Data Format: unsigned integer 8 bit
Default Value: 4
Subindex: 2 Bit-Offset = 192
Label: Autoblanking (during teach)
Value: 0 Not active (only manual configuration possible)
Value: 1 Active (blanking areas autom. configured by teach)
Data Format: unsigned integer 8 bit
Default Value: 0 Not active (only manual configuration possible)
Subindex: 3 Bit-Offset = 176
Label: Function blanking area 1
Value: 0 No beams blanked
Value: 1 Logical value 0 for blanked beams
Value: 2 Logical value 1 for blanked beams
Value: 3 Logical value = same as neighbor beam with lower beam number
Value: 4 Logical value = same as neighbor beam with higher beam number
Data Format: unsigned integer 16 bit
Default Value: 0 No beams blanked
Subindex: 4 Bit-Offset = 160
Label: Start beam blanking area 1
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 5 Bit-Offset = 144
Label: End beam blanking area 1
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 6 Bit-Offset = 128
Label: Function blanking area 2
Value: 0 No beams blanked
Value: 1 Logical value 0 for blanked beams
Value: 2 Logical value 1 for blanked beams
Value: 3 Logical value = same as neighbor beam with lower beam number
Value: 4 Logical value = same as neighbor beam with higher beam number
Data Format: unsigned integer 16 bit
Default Value: 0 No beams blanked
Subindex: 7 Bit-Offset = 112
Label: Start beam blanking area 2
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 8 Bit-Offset = 96
Label: End beam blanking area 2
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 9 Bit-Offset = 80
Label: Function blanking area 3
Value: 0 No beams blanked
Value: 1 Logical value 0 for blanked beams
Value: 2 Logical value 1 for blanked beams
Value: 3 Logical value = same as neighbor beam with lower beam number
Value: 4 Logical value = same as neighbor beam with higher beam number
Data Format: unsigned integer 16 bit
Default Value: 0 No beams blanked
Subindex: 10 Bit-Offset = 64
Label: Start beam blanking area 3
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 11 Bit-Offset = 48
Label: End beam blanking area 3
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 12 Bit-Offset = 32
Label: Function blanking area 4
Value: 0 No beams blanked
Value: 1 Logical value 0 for blanked beams
Value: 2 Logical value 1 for blanked beams
Value: 3 Logical value = same as neighbor beam with lower beam number
Value: 4 Logical value = same as neighbor beam with higher beam number
Data Format: unsigned integer 16 bit
Default Value: 0 No beams blanked
Subindex: 13 Bit-Offset = 16
Label: Start beam blanking area 4
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 14 Bit-Offset = 0
Label: End beam blanking area 4
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Access Rights: read and write
Index: 74
Label: Teach settings
Description: In most of applications it is generally recommended to store teach results power fail safe. Moreover, corresponding to the selected function reserve at teach operation, the sensitivity will be higher or smaller. Small function reserve = high sensitivity
Data Format: record 24 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 16
Label: Type of storage for teach values
Value: 0 Non-volatile storage of teach values
Value: 1 Teach values only saved while voltage ON
Data Format: unsigned integer 8 bit
Default Value: 0 Non-volatile storage of teach values
Subindex: 2 Bit-Offset = 8
Label: Sensitivity setting
Value: 0 High function reserve for robust application
Value: 1 Medium function reserve
Value: 2 Low function reserve
Data Format: unsigned integer 8 bit
Default Value: 0 High function reserve for robust application
Subindex: 3 Bit-Offset = 0
Label: Power-Up Teach
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Access Rights: read and write
Index: 75
Label: Teach height area
Description: Teach a single beam area
Value: 1 Height area 1 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 2 Height area 2 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 3 Height area 3 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 4 Height area 4 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 5 Height area 5 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 6 Height area 6 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 7 Height area 7 (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 8 Height area 8 (active: No interrupted beam - not active: >= 1 beam interrupted)
Data Format: integer 8 bit
Access Rights: write only
Index: 76
Label: Auto-Splitting
Description: Splitting all physically present beams into areas of identical size. This automatically configures the fields of all areas.
Value: 1 1 Area (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 2 2 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 3 3 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 4 4 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 5 5 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 6 6 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 7 7 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 8 8 Areas (active: No interrupted beam - not active: >= 1 beam interrupted)
Value: 257 1 Area (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 258 2 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 259 3 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 260 4 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 261 5 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 262 6 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 263 7 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Value: 264 8 Areas (active: >= 1 beam not interrupted - not active: all beams interrupted)
Data Format: integer 16 bit
Access Rights: write only
Index: 77
Label: Show detailed area configuration
Description: Choose the area (1..8) that requires detailed configuration.
Value: 0 Beam area 01
Value: 1 Beam area 02
Value: 2 Beam area 03
Value: 3 Beam area 04
Value: 4 Beam area 05
Value: 5 Beam area 06
Value: 6 Beam area 07
Value: 7 Beam area 08
Data Format: unsigned integer 8 bit
Default Value: 0 Beam area 01
Access Rights: read and write
Index: 80
Label: Digital IO Pin 2 Settings
Description: Configuration of In-/Outputs: Pin 2 / 5 / 6 / 7
Data Format: record 48 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 40
Label: Switching level
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 2 Bit-Offset = 32
Label: IO Function
Value: 0 Deactivated
Value: 1 Trigger input
Value: 2 Teach input
Value: 3 Area output
Value: 4 Warning output
Data Format: unsigned integer 8 bit
Default Value: 2 Teach input
Subindex: 3 Bit-Offset = 24
Label: Operating mode of time module
Value: 0 Deactivated
Value: 1 Start-up delay
Value: 2 Switch-off delay
Value: 3 Pulse stretching
Value: 4 Pulse suppression
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 4 Bit-Offset = 8
Label: Time constant for selected function
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 5 Bit-Offset = 0
Label: Area mapping 8..1
Data Format: unsigned integer 8 bit
Default Value: 1
Access Rights: read and write
Index: 81
Label: Digital IO Pin 5 Settings
Description: Configuration of In-/Outputs: Pin 2 / 5 / 6 / 7
Data Format: record 48 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 40
Label: Switching level
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 1 Inverted - dark switching
Subindex: 2 Bit-Offset = 32
Label: IO Function
Value: 0 Deactivated
Value: 1 Trigger input
Value: 2 Teach input
Value: 3 Area output
Value: 4 Warning output
Data Format: unsigned integer 8 bit
Default Value: 3 Area output
Subindex: 3 Bit-Offset = 24
Label: Operating mode of time module
Value: 0 Deactivated
Value: 1 Start-up delay
Value: 2 Switch-off delay
Value: 3 Pulse stretching
Value: 4 Pulse suppression
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 4 Bit-Offset = 8
Label: Time constant for selected function
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 5 Bit-Offset = 0
Label: Area mapping 8..1
Data Format: unsigned integer 8 bit
Default Value: 2
Access Rights: read and write
Index: 82
Label: Digital IO Pin 6 Settings
Description: Configuration of In-/Outputs: Pin 2 / 5 / 6 / 7
Data Format: record 48 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 40
Label: Switching level
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 2 Bit-Offset = 32
Label: IO Function
Value: 0 Deactivated
Value: 1 Trigger input
Value: 2 Teach input
Value: 3 Area output
Value: 4 Warning output
Data Format: unsigned integer 8 bit
Default Value: 3 Area output
Subindex: 3 Bit-Offset = 24
Label: Operating mode of time module
Value: 0 Deactivated
Value: 1 Start-up delay
Value: 2 Switch-off delay
Value: 3 Pulse stretching
Value: 4 Pulse suppression
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 4 Bit-Offset = 8
Label: Time constant for selected function
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 5 Bit-Offset = 0
Label: Area mapping 8..1
Data Format: unsigned integer 8 bit
Default Value: 4
Access Rights: read and write
Index: 83
Label: Digital IO Pin 7 Settings
Description: Configuration of In-/Outputs: Pin 2 / 5 / 6 / 7
Data Format: record 48 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 40
Label: Switching level
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 2 Bit-Offset = 32
Label: IO Function
Value: 0 Deactivated
Value: 1 Trigger input
Value: 2 Teach input
Value: 3 Area output
Value: 4 Warning output
Data Format: unsigned integer 8 bit
Default Value: 4 Warning output
Subindex: 3 Bit-Offset = 24
Label: Operating mode of time module
Value: 0 Deactivated
Value: 1 Start-up delay
Value: 2 Switch-off delay
Value: 3 Pulse stretching
Value: 4 Pulse suppression
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 4 Bit-Offset = 8
Label: Time constant for selected function
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 5 Bit-Offset = 0
Label: Area mapping 8..1
Data Format: unsigned integer 8 bit
Default Value: 8
Access Rights: read and write
Index: 90
Label: Configuration Area 01
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 1
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 1 Activated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 31
Access Rights: read and write
Index: 91
Label: Configuration Area 02
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 2
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 1 Activated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 31
Access Rights: read and write
Index: 92
Label: Configuration Area 03
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 3
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 1 Activated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 31
Access Rights: read and write
Index: 93
Label: Configuration Area 04
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 4
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 1 Activated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 32
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 31
Access Rights: read and write
Index: 94
Label: Configuration Area 05
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 5
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Access Rights: read and write
Index: 95
Label: Configuration Area 06
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 6
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Access Rights: read and write
Index: 96
Label: Configuration Area 07
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 7
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Access Rights: read and write
Index: 97
Label: Configuration Area 08
Description: Configuration of area: Define condition to ensure that area will be logical 1 or 0. Use the numbers of the logical beams.
Data Format: record 80 bit, Access via Subindex not supported
Subindex: 1 Bit-Offset = 72
Label: Beam area 8
Value: 0 Deactivated
Value: 1 Activated
Data Format: unsigned integer 8 bit
Default Value: 0 Deactivated
Subindex: 2 Bit-Offset = 64
Label: Logical behavior of area
Value: 0 Normal - light switching
Value: 1 Inverted - dark switching
Data Format: unsigned integer 8 bit
Default Value: 0 Normal - light switching
Subindex: 3 Bit-Offset = 48
Label: Start beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 4 Bit-Offset = 32
Label: End beam of area
Value Range: 1 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 1
Subindex: 5 Bit-Offset = 16
Label: Number of beams for area ON
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Subindex: 6 Bit-Offset = 0
Label: Number of beams for area OFF
Value Range: 0 ... 1776
Data Format: unsigned integer 16 bit
Default Value: 0
Access Rights: read and write
Index: 100
Label: PD Beamstream
Description: 8 Bytes
Data Format: array
Access Rights: read only
Index: 101
Label: PD Beamstream
Description: 16 Bytes
Data Format: array
Access Rights: read only
Index: 102
Label: PD Beamstream
Description: 32 Bytes
Data Format: array
Access Rights: read only
Index: 103
Label: PD Beamstream
Description: 64 Bytes
Data Format: array
Access Rights: read only
Index: 104
Label: PD Beamstream
Description: 128 Bytes
Data Format: array
Access Rights: read only
Index: 105
Label: PD Beamstream
Description: 222 Bytes
Data Format: array
Access Rights: read only
Index: 106
Label: Beamstream Mask
Description: 222 Bytes
Data Format: array
Access Rights: read only

Menu Entries

User Role Observation

Index: Label: Access Rights:
16 Vendor Name read only
17 Vendor Text read only
18 Product Name read only
19 Product ID read only
20 Product Text read only
21 Serial Number read only
22 Hardware Version read only
23 Firmware Version read only
24 Application Specific Tag read and write
40 Process Data Input read only
64 Receiver part no. read only
65 Transmitter product designation read only
66 Transmitter part no. read only
67 Transmitter serial number read only
68 Device characteristics read only

User Role Maintenance

Index: Label: Access Rights:
2 Standard Command write only
16 Vendor Name read only
17 Vendor Text read only
18 Product Name read only
19 Product ID read only
20 Product Text read only
21 Serial Number read only
22 Hardware Version read only
23 Firmware Version read only
24 Application Specific Tag read and write
40 Process Data Input read only
64 Receiver part no. read only
65 Transmitter product designation read only
66 Transmitter part no. read only
67 Transmitter serial number read only
68 Device characteristics read only
69 Teach status read only
70 Alignment read only
72 CSL status information read only
74 Teach settings read and write

User Role Specialist

Index: Label: Access Rights:
2 Standard Command write only
16 Vendor Name read only
17 Vendor Text read only
18 Product Name read only
19 Product ID read only
20 Product Text read only
21 Serial Number read only
22 Hardware Version read only
23 Firmware Version read only
24 Application Specific Tag read and write
40 Process Data Input read only
64 Receiver part no. read only
65 Transmitter product designation read only
66 Transmitter part no. read only
67 Transmitter serial number read only
68 Device characteristics read only
69 Teach status read only
70 Alignment read only
71 Global settings read and write
72 CSL status information read only
73 Blanking settings read and write
74 Teach settings read and write
75 Teach height area write only
76 Auto-Splitting write only
77 Show detailed area configuration read and write
80 Digital IO Pin 2 Settings read and write
81 Digital IO Pin 5 Settings read and write
82 Digital IO Pin 6 Settings read and write
83 Digital IO Pin 7 Settings read and write
90 Configuration Area 01 read and write
91 Configuration Area 02 read and write
92 Configuration Area 03 read and write
93 Configuration Area 04 read and write
94 Configuration Area 05 read and write
95 Configuration Area 06 read and write
96 Configuration Area 07 read and write
97 Configuration Area 08 read and write

Menu Structure

User Role Observation

User Role Maintenance

User Role Specialist

Identification

Parameter

Observation

  • Process data (defined evaluation functions)

Diagnosis